Top tips for priming and painting unfinished cabinet doors

Have you recently been considering investing in unfinished cabinet doors, or unfinished wood drawer fronts?

Before installing the same, numerous homeowners choose to have them nicely primed and painted. They may even choose to go ahead with unique effects for the unfinished cabinet doors, such as stains and grains.

Using the paint, it becomes possible to create a highly customized look for the cabinet doors or drawer fronts. One has a choice at outsourcing the paint job in entirety. Alternately, one has a choice at painting the unfinished cabinet doors and drawer fronts by oneself. DIY is a nice way to go ahead with the processes, and here, we present the top tips for the same. Let us start with priming:

Priming

Priming the unfinished cabinet doors well, before painting them, is important. So, a DIY enthusiast should use only a quality primer coat for the processes.

For this kind of project, in particular, a high adhesion primer would deliver the best results. Then, one should apply a light coat, apply the primer uniformly, and use minimum brush strokes. Keeping the brush strokes flat is likely to deliver the best results. This also helps prevent clumping, when one applies paint over the primer.

Similarly, one must give time for the primer to dry before one applies finish paint over it.

Painting

When you’re done applying the primer coat and after it dries, check the doors, visually. Then, check them manually to ensure that there are no drips or clumps over the surface.

In case there are any drips or clumps over the surface, they should be lightly blocked using sandpaper. Thereafter, wipe the area using a tack cloth.

It is now that one gets started with applying the finish paint, using either a brush or a roller. A fine tip in this regard is to make sure that the paint gets into each of the routed grooves or crevices.

One should try and make sure that one applies equal pressure over each of the strokes. This acts as a safeguard against roller lines.

One should also try and make sure that there is no excess paint over the brush when one paints. Lines of excess paint correspondingly do not form.

Applying more than one coat is likely to deliver the best results for unfinished cabinet doors. But multiple coats should not be applied simultaneously. Apply one coat, and wait for it to dry nicely before you apply the second.

In between applying the first coat of paint and the second, check for areas of excess paint and sandpaper them gently if required.

The final coat should be applied with some additional caution, as it has the maximum bearing over the finishing of cabinet fronts or drawer fronts. Before installing the doors, they should be allowed to dry for at least 48 hours.

The right kind of paint for unfinished cabinet fronts

Nonblocking paints are the preferable choice to go ahead with, for unfinished cabinet fronts. Latex paints should be avoided, while possible. Then keeping the work area free from dirt and debris is going to help.
For more info:-Cabinets Fronts

                          Custom Cabinet Door Replacements